F8 Features

• Patented design that allows for maximum return and yields the highest rebound of any shirt in this style.
• Engineered with the highest quality materials that maintain its elasticity and strength.
• Each layer offers resistance of 42 lbs./in. over an 8″ range of motion.
• Open back design with Velcro closure at the waist.
• Pull loops on each shoulder to ensure a proper fit.
• Check Federation rule book to confirm if approved for use.
• Made in the USA.

The Forell F8 Bench Shirt is also available in a single ply option.

Sizing

Sizes accommodate the widest range of body sizes. The size chart below is based on competitive weight class and arm circumference.

NOTE: Arm measurements may be the same between different weight classes, but the chest plate will be wider as weight class increases.

The post Multi-Ply Forell F8 Bench Shirt appeared first on Anderson Powerlifting.

The new standard among bench shirts!

The F8 bench shirt maximizes the transfer of the load and energy of the barbell from the shoulders to the triceps, pectoral, and latissimus regions while also reducing strain of the rotator cuffs and stabilizing the shoulder and shoulder girdle.

F8 Features:

• Patented design that allows for maximum return and yields the highest rebound of any shirt in this style.
• A chest plate that remains flat (no fold over).
• A pronounced sleeve with both THSPA and THSWPA logo imprints.
• Nylon straps to easily seat the shirt.
• Resistance of 42 lbs./in. over an 8″ range of motion.
• Engineered with the highest quality materials that maintain its elasticity and strength.
• Approved for Texas high school competition.
• Patent No. D,908,969.
• Made in the USA.

The Forell F8 Bench Shirt is also available in 2-ply and 3-ply options.

Sizing

The size chart below is based on competitive weight class.

Sizes accommodate a wide range of body sizes. These shirts run a bit large. If you are on the border between two sizes, we suggest you select the smaller size.

The post Forell F8 Bench Shirt appeared first on Anderson Powerlifting.

Features:

• NXG Super Plus fabric – the heaviest, strongest fabric in the lifting world. Created exclusively by Titan for powerlifting.
  • 26% thicker and stronger material than the older NXG+.
  • Virtually tear-proof and run-proof.
• Stretch back makes for an easier and more comfortable fit.
  • Spandex upgrades available for an even better fit (additional fees apply).
• Patent-pending torque sleeve design – creates additional energy storage and power.
• Horseshoe-shaped Super Collar – reinforced collar ties into the sleeve base and then runs straight across the upper pecs, tying the sleeve bases together to store more energy and generate even more power.
• Chest panel integrity – low cut collar does not scoop (cut) into the chest panel.
  • Our design complements and adds to performance; keeps the chest panel fully intact and reinforced with our Xtreme Super Collar.
• Double tack sleeve base seam – the strongest seam construction in the lifting world.
• Not legal for USPA/IPL (due to ‘IPF Approved’ stamp).

Sleeve design

• Straight sleeve – designed for benchers with a high touch point.

The post Titan Super Katana S/S Bench Shirt w/ LCC and ‘IPF Approved’ Stamp – 50 appeared first on Anderson Powerlifting.

The Katana bench shirt features:

• NXG Super Plus fabric – the heaviest, strongest fabric in the lifting world. Created exclusively by Titan for powerlifting.
  • 26% thicker and stronger material than the older NXG+.
  • Virtually tear proof and run proof.
• Patent pending torque sleeve design.
• Warranty: 2 years on blowouts and 1.5 years on NXG material runners!
• Made in the USA.
• Not legal for USPA/IPL (due to ‘IPF Approved’ stamp).

The Katana will take your benches to new heights!

Sleeve design

• Angled sleeve – for arched benchers with a lower touch point.
• Straight sleeve – designed for benchers with a high touch point.

The post Titan Katana Bench Shirt w/ ‘IPF Approved’ Stamp appeared first on Anderson Powerlifting.

Highest quality, heavyweight nylon/spandex fabric available provides great coverage, 2-way stretch for maximum comfort, vibrant colors, and a beautiful sheen.

• Power cut and full-length leg with a comfortable spandex leg band.
• High-cut front and side panels.
  • Offers maximum deltoid and upper chest coverage.
  • Great complement to low-cut bench shirts.
  • Wide-cut straps for maximum trap coverage.
  • Spandex leg bands for comfortable and secure leg coverage.
  • Comprexx fabric provides muscle control compression for active athletes.
    – Highest grade stretch fabric in the lifting world.
    – Stretches up to 600% for sure fits.
    – Helps keep muscles warm.
    – Provides passive muscle compression.
    – Comprexx fabric made in the USA.
• Non-supportive singlet for raw meets.
• Also an excellent non-supportive suit for benching or for deadlifters who prefer non-supportive suits.
• Cut and manufactured specifically for powerlifting (Not a wrestling singlet).
• Athletes muscles keep warm and loose enabling high levels of performance.
• Manufactured by Titan in the USA.

The post Titan Triumph Solid Color Singlet appeared first on Anderson Powerlifting.

• Made from laminated layers of NXG Super Plus fabric.
• Patented built-in harness system. The 3cm seams create an anatomically precise harness system for extra support and bigger squats.
  • New reinforced side seams create an inside seam with a smooth bore, like the barrel of a tank gun.
• Grid stitched glute panel of suit.
• No expansion panels like the competitors’.
• Aplix straps – 30% stronger than Velcro and proven performance in 1,200 lb.+ squats.

Wide Stance – for wide to extra wide stance squatters

Multi-ply Titan gear is currently out of stock. If interested in ordering a Boss Squat Suit, please contact Anderson Powerlifting at 972-733-3717.
Turnaround time on special orders is approximately 6-8 weeks.

The post 2-Ply Titan Boss Squat Suit Wide appeared first on Anderson Powerlifting.

All Super Katana Bench Shirts feature:

• NXG Super Plus fabric – the heaviest, strongest fabric in the lifting world
  • Created exclusively by Titan for powerlifting.
  • 26% thicker and stronger material than the older NXG+.
  • Virtually tear-proof and run-proof.
• Lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck.
• Increased width and thickness of the collar acts as an energy band to create more resistance and store more energy than the classic Katana.
• Patent pending torque sleeve design
• Product performance guarantee of 2 years on blowouts and 1.5 years on NXG material runners!

** The knit back will be either black or red fabric.

Angled Sleeve – Designed for benchers with a lower touch point.
Straight Sleeve – Designed for benchers with a high touch point.

The post Titan Super Katana Bench Shirt appeared first on Anderson Powerlifting.

• Features Titan’s patented harness system and a patent pending high neckline to provide maximum stability and maintain perfect posture in the pocket.
• Boss material down the center and the crotch with NXG Super Plus on the legs and sides.
• Comes with Aplix straps.
• 1 year warranty on blowouts and 1.5 years on runners.

Available in two stance models:

Conventional – Designed for deadlifters who use a close stance.
(Efficiency Profile – works best for lifters with a strong back, hips and slightly longer arms)

Sumo – Features angled legs to accommodate lifters who use a wide stance.
(Efficiency Profile – works best for lifters with very strong legs and hips. Strong squatters usually do best with this technique. This technique also helps shorten the stroke and compensate for less than optimal leverages on shorter armed lifters.)

Stock is currently limited. If interested in ordering an Unlimited Velocity suit, please contact Anderson Powerlifting at 972-733-3717. Turnaround time on special orders is approximately 4-6 weeks.

The post 2-Ply Titan Unlimited Velocity Deadlift Suit appeared first on Anderson Powerlifting.

• Single ply material that performs like double ply material and can outperform any other single ply bench shirt on the market.
• Evil Twin material is 15% thicker than the original Super NXG+ material used on the Super Katana.
• Approved in WABDL and USPA.

The post Titan Evil Twin Psycho A/S Bench Shirt appeared first on Anderson Powerlifting.

The baddest 2-ply bench shirt available. Come over to the Evil side and get serious about your bench!

Features:

• Horseshoe-shaped Super Collar
  • Reinforced collar ties into the sleeve base and then runs straight across the upper pecs, tying the sleeve bases together to store more energy and generate even more power.
• Chest panel integrity for max performance and energy storage!
  • Super Collar does not scoop (cut) into the chest panel, because every centimeter cut into the chest panel reduces energy storage and performance. Instead, this design complements and adds to performance by keeping the chest panel fully intact and reinforcing it with our Xtreme Super Collar patent pending Torque Sleeve.
• 90-degree hemispherical sleeve base design
  • Our world famous torque sleeve creates additional energy storage and power.
• Double tack sleeve base seam
  • NXG Super Plus – the strongest seam construction in the lifting world.
• Stretch back that makes for an easier and more comfortable fit.
• Approved in WABDL and USPA

The post 2-ply Titan Evil Twin Psycho A/S Bench Shirt – 38 appeared first on Anderson Powerlifting.